Adaptor for SRAM BB (24 to 22mm)
Adaptor for SRAM BB (24 to 22mm)
Share This
Aluminium Metal Insert (Adaptor) so that the same bearing can be used on the non-drive side for SRAM BB.
See full description for more info.
Part Type: SRAM Non-Drive Side Adaptor for 2437 Bearings (instead of using extended inner race 22mm bearing)
Inner x Outer x Depth (mm): 22 x 24 x 11.5
Pack Size: QTY 1
Used on: Bottom Brackets
Aluminium Metal Insert (Adaptor) so that the same 24mm ID bearing can be used on the non-drive side for SRAM BB. Also, allows the use of SRAM 22mm non-drive side crank arm on 24mm ID BB Bearings.
Note, this is where a 22mm SRAM axle chainset on the non drive side is present. Normally a 24mm bearing is used on drive side and a 22mm bearing with an extension is used on the non-drive side. If for instance you want to upgrade non-drive side bearing to stainless, ceramic or angular contact bearing, this inset can be used. Also handy if the 22mm bearing unavailable.
Part Type: SRAM Adaptor for 2437 Bearings
Size: 22 x 24 x 11.5
Pack Size: QTY 1
| size | 1 |
|---|