Inner x Outer x Depth (mm): 1 / 2" X 1 & 1 / 8" X 5 / 16" (12.7 x 28.5 x 8mm)
Used on: Wheels
RRP £3.99
Inner x Outer x Depth (inches): 3 / 4" x 1 - 5 / 8" x 7 / 16"
Used on: Bottom Brackets
RRP £4.99
Inner x Outer x Depth (mm): 30 x 41 / 42 x 7mm
Used on: Bottom Brackets (Using a BB30 crank on a BB86/92 Frame). Has a Flange around outer edge of 1mm
RRP £22.39
Angular Contact version of MR2437
Angular contact internally to help spread load through a larger axis to enable a longer life span.
Inner x Outer x Depth (mm): 24 x 37 x 7mm
Used on: Bottom Brackets
Inner x Outer x Depth (mm): 31 x 43 x 7
Used On: Bottom Brackets (SRAM)
Inner x Outer x Depth (mm): 31 x 43.5 x 7
Used On: Bottom Brackets
Inner x Outer x Depth (mm): 24 x 37 x 8
Used On: Bottom Brackets (GXP BB (Note, some use 24377 and some use this one 24378 on non-drive side))
This is a version of BB90 used on Mega Exo, which has a groove on the inner race
Inner x Outer x Depth (mm): 24 x 37 x 7
Used On: Mega Exo Bottom Brackets (7100)
Inner x Outer x Depth (mm): 24 x 37.1 x 7mm
Used on: Bottom Brackets, Trek BB90 (where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing)
RRP £7.69