DRF 3041-2RS (FD6806-2RSV) (Used on Press Fit 41, using 30mm ID - PF41-30)
£18.49
£15.41
Out of stock
Only 0 left
SKU
3041-2rsv
Share This
DUAL ROW, FLANGED BEARING has Increased bearing depth (11mm) enabling a double row of ball bearings, resulting in longer life span.
Contains Flange on Outer Edge.
Inner x Outer x Depth (mm): 30 x 41 / 44 x 11
Used On: Hope & Rotor Bottom Brackets (PF86, PF89. PF92 Bottom Brackets using 30mm Axle Cranks)
Part Ref: DRF 3041-2RSV
Bearing ID: 30mm
Bearing OD: 41mm / 44mm (Flange increases Outer Diameter by 3mm)
Bearing Thickness: 11mm
Material: Chromium Steel GCR15 (Race & Balls)
Used On: PF41 Bottom Bracket
Grease: SINOPEC HTHS Bearing Grease or equivalent
Seal: Double-sealed 2RS
Note: Increased bearing depth (11mm) enables a double row of ball bearings inside resulting in longer life
Write Your Own Review