Frame Pivot Bearing Removal & Installation Tool (for 6002 Bearing 15x32x9mm)

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from steel, to fit 6000 Bearings in size 15x32x9mm (ID x OD x Depth).

If you want to be able to professionally remove and install frame bearings with ease, this tool will make life much easier. It is also a much kinder on your frame (especially Carbon) and the bearing, as it should eliminate the need to get the hammer out and apply force to a drift.

We have tried (and discounted) many tools over the last couple of years, spoke to many Workshop mechanics about what works and what doesn't and we are confident this tool it is as good as anything out there covering the main sizes. We took our time launching this as we wanted feedback from busy workshops before committing to stock - this tool was given lots of positive praise.

Please be warned though, these tools are 'generic' and whilst they will fit most frames, they won't fit ALL frames.  We suggest you look closely at your frame before purchasing these tools as consideration needs to be given to access of these tools. If your frame has uneven surfaces around bearing or not enough surface area for the tools to sit around the bearing, then we suggest you contact the manufacturer of your frame for advice. Also, they are designed for use where you can access both sides of the bearing, for instance in linkages and stays. See the user instructions below to better understand how the tools work.

Download User Instructions Guide Here