Frame Pivot Bearing Removal & Installation Tool (for 6903 Bearing 17x30x7mm) NEW TYPE

Frame Pivot Bearing Removal & Installation Tool (for 6903 Bearing 17x30x7mm) NEW TYPE

£22.00 £18.33
In stock
Only 1 left
SKU
kbb-fpbr-6903

** IMPORTANT UPDATE** the design of the tools have changed slightly on the latest stock going forward. There is no longer a 'prong' cut-out and now is a continuous piece.  Most frames now have a flat surface around perimeter of bearing, which now enables the force of the load experienced when removing stubborn bearings to be distributed more evenly.

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6903 Bearings in size 17x30x7mm (ID x OD x Depth).

Will also work with 7903 Bearing for intallation.

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from steel, to fit 6903 Bearings in size 17x30x7mm (ID x OD x Depth).

Will also work with 7903 Bearing for installation (for removal it may leave the outer race in frame as 7 series angular bearings have independent races - these tools work by pressing on the inner race)

If you want to be able to professionally remove and install frame bearings with ease, this tool will make life much easier. It is also a much kinder on your frame (especially Carbon) and the bearing, as it should eliminate the need to get the hammer out and apply force to a drift.

We have tried (and discounted) many tools over the last couple of years, spoke to many Workshop mechanics about what works and what doesn't and we are confident this tool it is as good as anything out there covering the main sizes. We took our time launching this as we wanted feedback from busy workshops before committing to stock - this tool was given lots of positive praise.

Please be warned though, these tools are 'generic' and whilst they will fit most frames, they won't fit ALL frames.  We suggest you look closely at your frame before purchasing these tools as consideration needs to be given to access of these tools. If your frame has uneven surfaces around bearing or not enough surface area for the tools to sit around the bearing, then we suggest you contact the manufacturer of your frame for advice. Also, they are designed for use where you can access both sides of the bearing, for instance in linkages and stays. See the user instructions below to better understand how the tools work.

Download User Instructions Guide Here

 

More Information
size 1
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Copyright © 2013-present kineticbikebearings.com. All rights reserved.