Chromium

Only 1mm difference than 6902 bearing - this is 16mm ID, whereas a 6902 is 15mm.

Inner x Outer x Depth (mm): 16 x 28 x 7
Used On: Bottom Brackets

This bearing sometimes has '6002' marked on seal for reasons unknown. A 6002 bearing is 15 x 32 x 9, so please consider what you have to be sure.

Inner x Outer x Depth (mm): 16 x 31 x 10
Used On: Bottom Brackets

Inner x Outer x Depth (mm): 17 x 31 x 10
Used On: Bottom Brackets

USED ON Truvativ Howitzer Bottom Bracket.
Inner x Outer x Depth (mm): 21.2 x 38.5 x 9.5

Note: 6805 is normally 7mm deep, but this 6mm deep narrower version hence the "N" Suffix is what's used within Shimano HollowTech & Campag Ultra Torque BB's

Inner x Outer x Depth (mm): 25 x 37 x 6
Used On: Bottom Brackets (Shimano Hollowtech Bottom Brackets and Campagnolo Ultra Torque)

 USED ON BB30 BB's

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30)

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets (BB30) and Headsets

In long description, scroll to bottom of page to see direct fit alternatives.
RRP £11.99

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets
Brand: NTN or NSK as stock availability dictates
Note: Image used is generic and a guide for bearings size proportions. The seal colour may be different to that shown too.

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom brackets
Brand: NTN or NSK as stock availability dictates
Note: Image used is generic and a guide for bearings size proportions. The seal colour may be different to that shown too.

Inner x Outer x Depth (mm): 28 x 42 x 7/8mm (inner race extends 1mm)
Used on: Praxis Bottom Brackets
Important Note: This bearing will only fit a press-fit BB housing. If you have a screw fit BB, then a version of this bearing with a chamfer on the outside of the extension is required. At time of writing this (6th May 2022) this chamfered version is only known to be available from Praxis, and possibly only as a complete BB unit.