Chromium

FLANGED BEARING (F), Dual Row (D) has Increased bearing depth (12.60mm) enabling a double row of ball bearings. Contains Flange on Outer Edge increasing OD by 3mm from 41 to 44mm

Inner x Outer x Depth (mm): 30 x 41 / 44 x 12.60

Inner x Outer x Depth (mm): 24 x 30 x 16
Used On: eBike Motor (Brose Centre Axle)

Note: Also known as KP5AX
Inner x Outer x Depth (mm):  7.94mm x 20.64mm x 5.9/7.5mm (Imperial 5/16x13/16x9/32)
Used on: Full Suspension MTB Frames (Marin & Whyte Quad Link )

Inner x Outer x Depth (mm): 22 x 37 x 9mm 
Used on: Bottom Brackets

Note, this bearing has a small step/recess on the Inner Race to accommodate a seal
Inner x Outer x Depth (mm): 19 x 32 x 7
Used On: Bottom Brackets (FSA Mega Exo Non-Drive side)

Inner x Outer x Depth (mm): 19.05 x 31 x 7
Used On: Bottom Brackets (BMX & DJ )

Inner x Outer x Depth (mm): 19.05 x 37 x 9
Used on: BMX Bottom Bracket

Inner x Outer x Depth (mm): 21.5 x 31 x 7mm
Used on: Bottom Brackets

Inner x Outer x Depth (mm): 21.5 x 31 x 7
Used on: Frames (Santa Cruz)

Note, There are 2 types of SRAM/GXP BB Bearings - this is one, and the part ref MR22237-2RSV-B is the other.  It's difficult to determine which Bearings will be required without having removed the old one (note, this bearing on the non-drive side only, the other bearing is usually MR2437 or MR2437H8).  Check description of the other part ref as it is a slightly different configuration and generally used on the latest SRAM/GXP Bottom Brackets. 

Part Ref: MR22237-2RSV
Inner x Outer x Depth (mm):: 22.2x37x8mm/11.5mm
Used On: Bottom Brackets (SRAM/GXP)