Chromium

 USED ON BB30 BB's

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30)

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets (BB30) and Headsets

In long description, scroll to bottom of page to see direct fit alternatives.
RRP £11.99

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets
Brand: NTN or NSK as stock availability dictates
Note: Image used is generic and a guide for bearings size proportions. The seal colour may be different to that shown too.

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom brackets
Brand: NTN or NSK as stock availability dictates
Note: Image used is generic and a guide for bearings size proportions. The seal colour may be different to that shown too.

Inner x Outer x Depth (mm): 28 x 42 x 7/8mm (inner race extends 1mm)
Used on: Praxis Bottom Brackets
Important Note: This bearing will only fit a press-fit BB housing. If you have a screw fit BB, then a version of this bearing with a chamfer on the outside of the extension is required. At time of writing this (6th May 2022) this chamfered version is only known to be available from Praxis, and possibly only as a complete BB unit.

Inner x Outer x Depth (mm): 29 x 42 x 7mm
Used on: DUB Bottom Brackets
RRP £11.99

ANGULAR CONTACT VERSION OF 6806/BB30

Note: This is an internally angular contact version of 6806 - will take vertical and horizontal loads - an answer to get longer life from a BB30 bottom bracket.

In long description, scroll to bottom of page to see direct fit alternatives.

Inner Diameter x Outer Diameter x Depth: 30x 42 x 7mm
Used on: Bottom Brackets

RRP: £18.99

ANGULAR CONTACT VERSION OF 6806/BB30
Also known as 71806

Note: This is an internally angular contact version of 6806 - will take vertical and horizontal loads - an answer to get longer life from a BB30 bottom bracket. This bearing can only be inserted one way - observing the inner race, there is a different thickness on either side.  The side with the thicker inner race should be on the outside facing you when installing (due to internal chamfer angle).

In long description, scroll to bottom of page to see direct fit alternatives.

Inner x Outer x Depth (mm): 30x 42 x 7mm
Used on: Bottom Brackets

FLANGED BEARING (F), Dual Row (D) has Increased bearing depth (11 mm) enabling a double row of ball bearings. Contains Flange on Outer Edge increasing OD by 3mm from 41 to 44mm
Inner x Outer x Depth (mm): 30 x 41 / 44 x 11mm
Used On:  Hope & Rotor Bottom Brackets PF41-30 (PF86, PF89. PF92 Bottom Brackets using 30mm Axle Cranks)
Note: There are 3 versions of this bearing, it may be that you need one of the others.  Also see part ref's:
FD6806 2RSV (30 x 41/44 x 11mm) - this listing.
FD6806 2RSV H10.20 (30 x 41/44 x 10.2mm)
FD6806 2RSV H12.60 (30 x 41/44 x 12.60mm)
Search site for 'FD6806' to see all options

FLANGED BEARING (F), Dual Row (D) has Increased bearing depth (10.20mm) enabling a double row of ball bearings. Contains Flange on Outer Edge increasing OD by 3mm from 41 to 44mm

Inner x Outer x Depth (mm): 30 x 41 / 44 x 10.20