Enduro Bearings

Inner x Outer x Depth (mm): 5 x 14 x 5mm
Used on: MTB Frame Suspension Pivots (Scott Ransom 2009)

Note: FE Means "Flanged" and "Extended" and SP Denotes Split inner race

Inner x Outer x Depth (mm): M1.0 x 22 x 8/12mm
Used on: Pivot Cycles & BMC

Note: FE Means "Flanged" and "Extended" - has spilt inner race and two opposing flat surfaces. too.

Inner Diameter x Outer Diameter x Depth: M1.25 x 22 x 8/11mm

Used on: Pivot Cycles

Note: FE Means "Flanged" and "Extended" - Flange is 2mm taking overall dia to 24mm, Inner Race Extends 1mm, taking overall depth to 8mm

IInner x Outer x Depth (mm):8 x 22/24 x 7/8mm
Used on: Yeti & Pivot Cycles

Inner x Outer x Depth (mm): 8 x 22 x 7mm
Used on: Wheels

Inner x Outer x Depth (mm): 8 x 22 x 7mm
Used on: MTB Frame Suspension Pivots

Note: "E" for Extension - the inner race extends 3mm

Inner x Outer x Depth (mm): 8 x 22 x 7/10mm 
Used on: Used on Pivot Cycles

Enduro have made this bearing with 2RS and LLB seals in past. Our stock often contain both options, so you could receive either option.

Inner Diameter x Outer Diameter x Depth: 9 x 24 x 7mm
Used on: Wheels

Inner x Outer x Depth (mm): 9 x 24 x 7mm
Used on: MTB Frame Suspension Pivots

Inner x Outer x Depth (mm): 12 x 32 x 10mm
Used on: Wheels/Frames