Frame Pivot Bearings

Important: this is an 'extended' inner race bearing - the inner race extends 3mm - as used on the brand Pivot Cycles

Inner x Outer x Depth (mm): 15 x 24 x 7/10mm
Used on: Frames

Dual Row and wider version version of  3802
Inner x Outer x Depth (mm): 15 x 24 x 10
Used On: Mountain Bike Frame Pivots

Inner x Outer x Depth (mm): 17 x 26 x 10
Used On: Trek Frames (Trek ref: W5256338 or W302025)
Note: this is a MAX bearing - do not use in wheel hubs (Industry 9), we have a separate non-max bearing for this. Note,Trek use this bearing in a non-max version in their full suspension frames. This MAX version is a stronger upgrade.

Inner x Outer x Depth (mm): 17 x 30 x 10
Used on: Frames

Inner x Outer x Depth (mm): 17 x 30 x 10mm
Used on: Frames (Yeti 575 2011-2013 & Yeti 303 RDH 2009-2011)

Note: Dual Row Bearing with an extended inner race of 3mm

Inner x Outer x Depth (mm):17 x 30 x 10/13mm (inner race extends 3mm)
Used on: MTB Frame Suspension Pivots (Pivot Pheonix DH Frame)

Inner x Outer x Depth (mm): 8 x 19 x 10/11
Bearing Thickness: 10mm, inner extends to 11mm
Used On: Frames (Yeti 575)

Inner x Outer x Depth (mm): 10 x 26 x 8
Used on: Frames

Inner x Outer x Depth (mm): 10 x 26 x 8mm
Used on: MTB Frame Suspension Pivots

Inner x Outer x Depth (mm): 12 x 28 x 8/9mm (8mm thick bearing with an ID that extends 1mm on one side)
Used on: Frames (Ghost Cagua Main Pivot)