Wheel Bearings

Inner x Outer x Depth (mm): 16 x 26 x 7
Used On: Wheels 

Inner x Outer x Depth (mm): 17 x 28 x 7
Used On: Wheels (Hope ProII Evo Freehub & Pro III Front Hub)

Inner x Outer x Depth (mm): 17 x 28 x 7mm
Used on: Wheels

Inner x Outer x Depth (mm): 18 x 28 x 7
Used On: Wheels (Vision Wheels)
2RS or LLB seals suplied.

THIS BEARING IS 1mm DIFFERENT FROM 6903-2RS AND USED IN MANY HUBS. THE ORIGINAL BEARING QUITE OFTEN HAS 61903 ON THE SEAL - CHECK YOUR INTERNAL DIA, THIS HAS 18MM (61903 CAN ALSO BE 17MM INTERNAL DIA WHICH IS 6903)

Current stock is LBLU seal (LB non contact, LU is contact, red contact LU seal facing outwards for increased bearing life).

Inner x Outer x Depth (mm): 18 x 30 x 7
Used On: Wheels (DT Swiss Hubs)

Inner x Outer x Depth (mm): 18 x 30 x 7mm
Used on: Wheels

Inner x Outer x Depth (mm): 19 x 28 x 5
Used on: Fulcrum Freehub

Inner x Outer x Depth (mm): 19 x 28 x 5mm
Used on: Wheels

Inner x Outer x Depth (mm): 17 x 26 x 10mm
Used on: I9 Hubs

Inner x Outer x Depth (mm): 17 x 26 x 10
Used On: Industry 9 Wheels
Note: You can use this on Trek suspension pivots too, but we recommend using the MAX version if we have stock- see separate listing.

Equivalent to 3803 LLB-W