Tools

Drifts to press bearings into Frames, Wheels and Bottom Brackets.

Select size(s) of drift press you need (i.e. to fit 6902) - you will receive a pair of drifts.

Then purchase the Threaded Bar separately using drop down options.

If you need more drifts in future, you will then already have the threaded bar, so won't need to keep purchasing threaded bar unneccesarily.

Digital Vernier Caliper 0-150mm
Carbon Composite Construction
Supplied without case.

PLEASE NOTE, THE CALIPER WILL BE SUPPLIED LOOSE AND NOT IN CASE PICTURED.

Digital Vernier Caliper 0-150mm
Stainless Steel Construction

Fork Seal Driver (4 in 1)

Fits 32, 34, 35 & 36mm Diameter Seals.

Made from hard plastic, so requires use of a soft/rubber mallet.

** IMPORTANT UPDATE** the design of the tools have changed slightly on the latest stock going forward. There is no longer a 'prong' cut-out and now is a continuous piece.  Most frames now have a flat surface around perimeter of bearing, which now enables the force of the load experienced when removing stubborn bearings to be distributed more evenly. Temporary picture displayed.

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6000 Bearings in size 10x26x8mm (ID x OD x Depth).

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6001 Bearings in size 12x28x8mm (ID x OD x Depth).

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6002 Bearings in size 15x32x9mm (ID x OD x Depth).

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 608 Bearings in size 8x22x7mm (ID x OD x Depth).

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6800 Bearings in size 10x19x5mm (ID x OD x Depth).

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6801 Bearings in size 12x21x5mm (ID x OD x Depth).

Will also work with 3801 Bearing