Bearing Kits

2 x Bearings (Upper & Lower) to fit Canyon Headset on following Road Bikes - CF Aeroad, Ultimate or Endurance

NOTE, This does not fit Canyon SLX Models BEFORE 2016.
Used On: Carbon Fibre Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 

Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

Important to note: This is a Bearing 'set' which consists of an upper and lower heasdset bearing & compression ring. It is made by Acros.

Upper Bearing (AC3544)
Inner x Outer x Depth (mm): 35 x 44 x 5.5
Angle / Chamfer (Deg): 36/45

Lower Bearing (AC3344)
Inner x Outer x Depth (mm): 33 x 44 x 6
Angle / Chamfer (Deg): 36/45

RRP £59.99

Canyon/Acros AI70 Compression Ring.

Plastic ring inserted within the 6707-2RS Upper Bearing in the AI70 Headset

Used On: Canyon Bikes that run the AI-70 Headset (NOTE, This does not fit Canyon Endurance, Ultimate, Aeroad SLX 2016 onwards)
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon. 

This is a Bearing 'set' which consists of an upper and lower heasdset bearing & compression ring. 

Lower Bearing (AC3748)
Inner x Outer x Depth (mm): 37 x 48 x 7
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side

Upper Bearing (6707-2RS)
Inner x Outer x Depth (mm): 35 x 44 x 5
Angle / Chamfer (Deg): Non

RRP £59.99

Alternative Non-Acros version of this bearing set

Used On: Canyon Bikes that run the AI-70 Headset (NOTE, This does not fit Canyon Endurance, Ultimate, Aeroad SLX 2016 onwards)
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon. 

This is a Bearing 'set' which consists of an upper and lower heasdset bearing & compression ring. 

Lower Bearing (AC3748)
Inner x Outer x Depth (mm): 37 x 48 x 7
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side

Upper Bearing (6707-2RS)
Inner x Outer x Depth (mm): 35 x 44 x 5
Angle / Chamfer (Deg): Non

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only (6 Bearings). No other hardware such as bushes, nuts, bolts & washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only (6 bearings supplied). No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.