Search results for: 'capra+cf+20mm+headset+bearing'

Fits: Canyon/Acros Aeroad SLX
Upper Bearing for SLX Models after 2016 - Also known as: AC3544

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

See main description for more detail.

Inner x Outer x Depth (mm): 35 x 44 x 5.5
Angle / Chamfer (Deg): 36/45

Note: Our primary stock has a black oxide coating at no extra cost. If stock is running low of this version we will substitute it for standard silver chromium finish bearing.

Fits: Canyon/Acros Aeroad SLX, same as AC3544
Upper Bearing for SLX Models after 2016 - Also known as: AC3544

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

See main description for more detail.

Inner x Outer x Depth (mm): 35 x 44 x 5.5
Angle / Chamfer (Deg): 36/45

Fits: Canyon/Acros Aeroad SLX, same as AC3344
(Lower Bearing for SLX Models after 2016)
Also known as: AC3344

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

Inner x Outer x Depth (mm): 33 x 44 x 6
Angle / Chamfer (Deg): 36/45

Note: Our primary stock has a black oxide coating at no extra cost. If stock is running low of this version we will substitute it for standard silver chromium finish bearing.

Fits: Canyon/Acros Aeroad SLX, same as AC3344
(Lower Bearing for SLX Models after 2016)
Also known as: AC3344

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

Inner x Outer x Depth (mm): 33 x 44 x 6
Angle / Chamfer (Deg): 36/45

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

THE UPPER BEARING FOR AN ACROS AI-70 HEADSET USED ON CANYON BIKES
NOTE, These do not fit Canyon Ultimate CF SLX 2016 onwards - you will require bearings AC3544 (upper) and AC3344 (Lower)

Inner x Outer x Depth (mm): 35 x 44 x 5
Inch Dia: 1 - 1 / 4
Angle / Chamfer: Non
AKA: 61707 - 2RS

This listing is for a full set of Frame Pivot Bearings only (13 bearings, 3 different part numbers). No other hardware such as nuts, bolts, washers will be supplied.

Fits Canyon frame references M089 and M062 (CF and CF SLX)

Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

ACB30418K Headset Bearing

Found in 'some' Acros Headsets

Inner x Outer x Depth (mm): 30.1 x 41.8 x 8
Inch Dia: 1-1/8”
Angle / Chamfer (Deg): 36 / 45