Search results for: 'order with fs headset bearings'

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets (BB30) and Headsets

In long description, scroll to bottom of page to see direct fit alternatives.

OUR CURRENT STAINLESS STOCK IS ENDURO BRANDED WITH LLB SEALS 

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30, Pinarello Headset)

In long description, scroll to bottom of page to see direct fit alternatives.

 USED ON BB30 BB's

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30)

Inner x Outer x Depth (mm): 30 x 42 x 6.5
Used on: Nukeproof Bottom Brackets.
Note: 6806 bearings (BB30) are normally 7mm thick, but this version is 6.5mm and fits some FSA and Nukeproof BB's

Inner x Outer x Depth (mm): 30 x 41 x 7
Used On: Bottom Brackets
Note: Mount bearing with red seal facing outwards.

Inner x Outer x Depth (mm): 25 x 36 x 7
Used On: Mahle X20 Bottom Brackets
Note: Mount bearing with red seal facing outwards.

Note: Bottom Brackets, Trek BB90 (where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing)

Inner x Outer x Depth (mm): 24 x 37.1 x 7

Note: Angular Contact version of MR2437. Angular contact internally to help spread load through a larger axis to enable a longer life span. Note, this IS NOT an Enduro Bearing.

Can only be mounted in 1 direction else bearing failure will occur. Mount with thickest inner race facing outwards, which is black seal.

Inner x Outer x Depth (mm): 24 x 37 x 7mm
Used on: Bottom Brackets (BB90 Fit)

Inner x Outer x Depth (mm): 28 x 41/42 x 7.6
Used On: Praxis BB
Note:  This bearing only fits Praxis M30 BB for 28mm non-drive side axle for BB86, BB90/92
For the drive side using 30mm axle, you will need our part FD6806 2RSV (DRF3041) 
https://www.kineticbikebearings.com/drf3041-2rs-aka-fd6806-2rsv.html

Inner x Outer x Depth (mm): 28 x 42 x 7/8mm (inner race extends 1mm)
Used on: Praxis Bottom Brackets
Important Note: This bearing will only fit a press-fit BB housing. If you have a screw fit BB, then a version of this bearing with a chamfer on the outside of the extension is required. At time of writing this (6th May 2022) this chamfered version is only known to be available from Praxis, and possibly only as a complete BB unit.