Search results for: 'order with fs headset bearings'

Inner Diameter x Outer Diameter x Depth: 12 x 21 x 5mm

Used on: Wheels
Brand: NTN

Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Dual Row version of 63801 Max
Inner x Outer x Depth (mm): 12 x 21 x 7
Used On: Canyon Frames

Note: 3801 and 63801 are same dimension, but internally the 3801 is dual row and the 63801 is single row.  The 3801 (this one) is slightly stronger.  Canyon specify 63801 on their frame, but you can use this if either 63801 Max out of stock or if you want a slightly stronger bearing.

Be Careful: Trek use a very similar bearing (3801 MAX) but it varies in depth - the Trek version is 8mm depth.

Inner Diameter x Outer Diameter x Depth: 12 x 21 x 5mm
Used on: Wheels
Brand: NTN

Seals: LLU contact seals are a closer fitting seal to rotating parts, and thus provide better protection against dirt and moisture ingress. Use where bearing longevity is more important and/or you frequently use your bike in harsh conditions. If racing or chasing watts is your priority then our non-contacting low friction seal version of this bearing (LLB Seals) might be more appropriate.

Inner x Outer x Depth (mm): 12.7 x 24 x 7/8.5 (1.5mm inner race extension)
Used on: MTB Frame Suspension Pivots (Yeti, YT and Zerode)
Note: This is a bearing with an inner extended race of 1.5mm

Important: this is an 'extended' inner race bearing - the inner race extends 3mm - as used on the brand Pivot Cycles

Inner x Outer x Depth (mm): 15 x 24 x 7/10mm
Used on: Frames

Inner x Outer x Depth (mm): 10 x 22 x 6mm
Used on: Wheels
Brand: NTN

Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Inner x Outer x Depth (mm): 12 x 24 x 6mm
Used on: Wheels
Brand: NTN

Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Note: "DR" is for "Dual Row" Bearing. Bearing inner race extends by 0.5mm on both sides
Inner x Outer x Depth (mm): 10 x 17 x 6/7mm
Used on: MTB Frame Suspension Pivots (Evil & Orbea Bikes)

Dual Row Bearing (Alternative to Enduro DR1526)
Inner x Outer x Depth (mm): 15 x 26 x 10
Used On: Ibis Mojo Frames and i9 Hubs

Dual Row Bearing (W meaning WIDE)

Inner x Outer x Depth (mm): 15 x 24 x 10mm
Used on: Wheels (White Industries & Shimano M/Spline Freehub)