Search results for: 'order will fs headset bearings'

Inner x Outer x Depth (mm): 25 x 36 x 7
Used On: Mahle X20 Bottom Brackets
Note: Mount bearing with red seal facing outwards.

Note: Bottom Brackets, Trek BB90 (where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing)

Inner x Outer x Depth (mm): 24 x 37.1 x 7

Note: Angular Contact version of MR2437. Angular contact internally to help spread load through a larger axis to enable a longer life span. Note, this IS NOT an Enduro Bearing.

Can only be mounted in 1 direction else bearing failure will occur. Mount with thickest inner race facing outwards, which is black seal.

Inner x Outer x Depth (mm): 24 x 37 x 7mm
Used on: Bottom Brackets (BB90 Fit)

Note, There are 2 types of SRAM/GXP BB Bearings - this is one, and the part ref MR22237-2RSV-B is the other.  It's difficult to determine which Bearings will be required without having removed the old one (note, this bearing on the non-drive side only, the other bearing is usually MR2437 or MR2437H8).  Check description of the other part ref as it is a slightly different configuration and generally used on the latest SRAM/GXP Bottom Brackets. 

Part Ref: MR22237-2RSV
Inner x Outer x Depth (mm):: 22.2x37x8mm/11.5mm
Used On: Bottom Brackets (SRAM/GXP)

Note, There are 2 types of SRAM/GXP BB Bearings - this is one, and the part ref MR22237-2RSV is the other.  It's difficult to determine which Bearings will be required without having removed the old one (note, this bearing on the non-drive side only, the other bearing is usually MR2437 or MR2437H8).  Check description of the other part ref as it is a slightly different configuration and generally used on the latest SRAM/GXP Bottom Brackets. 

Part Ref: MR22237-2RSV
Inner x Outer x Depth (mm): 22.2x37x8mm/11.5mm
Used On: Bottom Brackets (SRAM/GXP)

This bearing sometimes has '6002' marked on seal for reasons unknown. A 6002 bearing is 15 x 32 x 9, so please consider what you have to be sure.

Inner x Outer x Depth (mm): 16 x 31 x 10
Used On: Bottom Brackets

Note: Bottom Brackets, Trek BB90 (where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing)

Inner x Outer x Depth (mm): 24 x 37.1 x 7mm

Dual row bearing, used on ISIS Stronglight BB, equivalent to Enduro DR21531-SW.

Inner x Outer x Depth (mm): 21.5 x 31 x 14
Used On:  Bottom Brackets (ISIS Stronglight)

Note, this bearing has a small step/recess on the Inner Race to accommodate a seal
Inner x Outer x Depth (mm): 19 x 32 x 7
Used On: Bottom Brackets (FSA Mega Exo Non-Drive side)

Note: Bottom Brackets non drive side, Carbon Trek's using SRAM Cranks where a slightly larger OD bearing is required (37.1mm instead of standard 37mm)

Inner x Outer x Depth (mm): 22 x 37.1 x 8/11.5mm (inner race extends 3.5mm)