Search results for: 'order with fs headset bearings'

Note: This a standard 2RS bearing with a cage - see the stronger MAX compliment version if the application is for a mountain bike frame pivot.

Inner x Outer x Depth (mm): 40 x 52 x 7
Used On: Wheels

Note: Flanged Outer & Extended inner bearing (Flange on opposite end to extended inner)
Equivalent to Enduro F6902 MAX-EA 
Inner Diameter x Outer Diameter x Depth: 15 x 28 x 7mm/9.5mm
Used on: Yeti Full Suspension MTB Frames (SB5C 2014-2016) and also Nukeproof Mega 2021+

Note: Flanged Outer & Extended inner bearing (Flange on same side as extended inner), Yeti Part Ref: 300020045, Equivalent to Enduro F6902 MAX-EB
Inner Diameter x Outer Diameter x Depth: 15 x 28 x 7mm/9.5mm
Used on: Yeti Full Suspension MTB Frames MTB Frame Suspension Pivots (Yeti SB4.5C,SB5C, SB5.5C, SB5+, SB6C)

Inner x Outer x Depth (mm): 25 x 37 x 7mm
Used on: Wheels
Brand: NTN
Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Inner x Outer x Depth (mm): 20 x 32 x 7mm
Used on: Wheels
Brand: NTN

Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Inner x Outer x Depth (mm): 17mm x 30mm x 7mm
Used on: Full Suspension MTB Frames (Yeti SB66 alu 2011-2013)
Construction: Angular Contact - IMPORTANT, these bearings are directional and need to be fitted with black seal facing outwards. If not they will fail.

Inner x Outer x Depth (mm): 25 x 42 x 9

Used On: BMX Hubs (This is an Angular Contact Bearing - has to be inserted with black seal facing outwards, which contains the thicker inner race)

This is an Angular Contact Bearing, same as 6804, but the '7' in the 7804 denotes internal angular construction.

Inner x Outer x Depth (mm): 20 x 32 x 7mm
Used on: Wheels (Brand: E13)

Inner x Outer x Depth (mm): 15 x 35 x 11
Used On: Wheels

Inner x Outer x Depth (mm): 15 x 32 x 9
Used On: Wheels (Hope, Stans)