Search results for: 'order with fs headset bearings'

Inner x Outer x Depth (mm): 30 x 42 x 7mm
Used on: Bottom Brackets (BB30) and Headsets

In long description, scroll to bottom of page to see direct fit alternatives.

OUR CURRENT STAINLESS STOCK IS ENDURO BRANDED WITH LLB SEALS 

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30, Pinarello Headset)

In long description, scroll to bottom of page to see direct fit alternatives.

 USED ON BB30 BB's

Inner x Outer x Depth (mm): 30 x 42 x 7
Used On: Bottom Brackets (BB30)

FLANGED BEARING (F), Dual Row (D) has Increased bearing depth (10.20mm) enabling a double row of ball bearings. Contains Flange on Outer Edge increasing OD by 3mm from 41 to 44mm

Inner x Outer x Depth (mm): 30 x 41 / 44 x 10.20

Inner x Outer x Depth (mm): 30 x 42 x 6.5
Used on: Nukeproof Bottom Brackets.
Note: 6806 bearings (BB30) are normally 7mm thick, but this version is 6.5mm and fits some FSA and Nukeproof BB's

FLANGED BEARING (F), Dual Row (D) has Increased bearing depth (12.60mm) enabling a double row of ball bearings. Contains Flange on Outer Edge increasing OD by 3mm from 41 to 44mm

Inner x Outer x Depth (mm): 30 x 41 / 44 x 12.60

Inner x Outer x Depth (mm): 30 x 41 x 7
Used On: Bottom Brackets
Note: Mount bearing with red seal facing outwards.

Inner x Outer x Depth (mm): 28 x 41/42 x 7.6
Used On: Praxis BB
Note:  This bearing only fits Praxis M30 BB for 28mm non-drive side axle for BB86, BB90/92
For the drive side using 30mm axle, you will need our part FD6806 2RSV (DRF3041) 
https://www.kineticbikebearings.com/drf3041-2rs-aka-fd6806-2rsv.html

Inner x Outer x Depth (mm): 28 x 42 x 7/8mm (inner race extends 1mm)
Used on: Praxis Bottom Brackets
Important Note: This bearing will only fit a press-fit BB housing. If you have a screw fit BB, then a version of this bearing with a chamfer on the outside of the extension is required. At time of writing this (6th May 2022) this chamfered version is only known to be available from Praxis, and possibly only as a complete BB unit.

Inner x Outer x Depth (mm): 28 x 42 x 7/8mm (inner race extends 1mm)
Used on: Praxis Bottom Brackets
Important Note: This bearing will only fit a press-fit BB housing. If you have a screw fit BB, then a version of this bearing with a chamfer on the outside of the extension is required. At time of writing this (6th May 2022) this chamfered version is only known to be available from Praxis, and possibly only as a complete BB unit.