Sealed Bearings

USED ON Truvativ Howitzer Bottom Bracket.
Inner x Outer x Depth (mm): 21.2 x 38.5 x 9.5
Note, the groove on the outside of the outer race does not contain a seal.  it is not supplied with this bearing, and thus you need to use existing seal, or source one from a seal specialist.

Note: 6805 is normally 7mm deep, but this 6mm deep narrower version hence the "N" Suffix is what's used within Shimano HollowTech & Campag Ultra Torque BB's

Inner x Outer x Depth (mm): 25 x 37 x 6
Used On: Bottom Brackets (Shimano Hollowtech Bottom Brackets and Campagnolo Ultra Torque)

Dual row bearing, used on ISIS Stronglight BB, equivalent to Enduro DR21531-SW.

Inner x Outer x Depth (mm): 21.5 x 31 x 14
Used On:  Bottom Brackets (ISIS Stronglight)

Inner x Outer x Depth (mm): 22 x 37 x 9mm 
Used on: Bottom Brackets

Inner x Outer x Depth (mm): 21.5 x 31 x 7mm
Used on: Bottom Brackets
Note: stock supplied to us can have LLB or 2RS seals.  We consider them the same.

Inner x Outer x Depth (mm): 21.5 x 31 x 7
Used on: Frames (Santa Cruz)

Note, There are 2 types of SRAM/GXP BB Bearings - this is one, and the part ref MR22237-2RSV-B is the other.  It's difficult to determine which Bearings will be required without having removed the old one (note, this bearing on the non-drive side only, the other bearing is usually MR2437 or MR2437H8).  Check description of the other part ref as it is a slightly different configuration and generally used on the latest SRAM/GXP Bottom Brackets. 

Part Ref: MR22237-2RSV
Inner x Outer x Depth (mm):: 22.2x37x8mm/11.5mm
Used On: Bottom Brackets (SRAM/GXP)

Note, There are 2 types of SRAM/GXP BB Bearings - this is one, and the part ref MR22237-2RSV is the other.  It's difficult to determine which Bearings will be required without having removed the old one (note, this bearing on the non-drive side only, the other bearing is usually MR2437 or MR2437H8).  Check description of the other part ref as it is a slightly different configuration and generally used on the latest SRAM/GXP Bottom Brackets. 

Part Ref: MR22237-2RSV
Inner x Outer x Depth (mm): 22.2x37x8mm/11.5mm
Used On: Bottom Brackets (SRAM/GXP)

Inner x Outer x Depth (mm): 22 x 31 x 7
Used on: Frame Pivots (Commencal Supreme V5)
Note: BO in part ref means Black Oxide, which is our corrosion resistant coating

Inner x Outer x Depth (mm): 22 x 31 x 7
Used On: Bottom Brackets