Sealed Bearings

Note: FE Means "Flanged" and "Extended" - Flange is 2mm taking overall dia to 24mm, Inner Race Extends 1mm, taking overall depth to 8mm

IInner x Outer x Depth (mm):8 x 22/24 x 7/8mm
Used on: Yeti & Pivot Cycles
RRP: £6.49

THE UPPER BEARING FOR AN ACROS AI-70 HEADSET USED ON CANYON BIKES
NOTE, These do not fit Canyon Ultimate CF SLX 2016 onwards - you will require bearings AC3544 (upper) and AC3344 (Lower)

Inner x Outer x Depth (mm): 35 x 44 x 5
Inch Dia: 1 - 1 / 4
Angle / Chamfer: Non

NOTE, THIS BEARINGS HAS BEEN DISCONTINUED BY ENDURO - WE CAN NO LONGER PURCHASE.

Inner x Outer x Depth (mm): 30.2 x 42 x 7
Inch Dia: 1-1/8”
Angle / Chamfer (Deg): 1 x 45 Deg Chamfer on Inner Race
Used on: Pinarello Headsets / Acor

FITS MANY PINARELLO ROAD BIKES USING NON-TAPERED 1-1/4" BEARINGS (SEE SEPARATE LISTING FOR STAINLESS VERSION)

Inner x Outer x Depth (mm): 35 x 47 x 7
Inch Dia: 1 - 1 / 4"
Angle / Chamfer: Non
Material: Chromium Steel GCR15 (Race & Balls)

FITS MANY PINARELLO ROAD BIKES USING NON-TAPERED 1-1/4" BEARINGS

• Inner x Outer x Depth (mm): 35 x 47 x 7
• Inch Dia: 1 - 1 / 4"
• Angle / Chamfer: Non
• Material: Stainless Steel SS440C (Race & Balls)

(Lower Bearing for SLX Models after 2016)
Also known as: AC3344

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

Inner x Outer x Depth (mm): 33 x 44 x 6
Angle / Chamfer (Deg): 36/45

(Upper Bearing for SLX Models after 2016)
Also known as: AC3544

Used On: Canyon Bikes that run the AI-70 Headset on these Canyon Models after 2016 (R36 Endurace CF SLX, R39 Ultimate CF SLX, R28 Aeroad CF SLX) 
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon

Inner x Outer x Depth (mm): 35 x 44 x 5.5
Angle / Chamfer (Deg): 36/45

Inner x Outer x Depth (mm): 35 x 47 x 7
Inch Dia: 1 - 1 / 4”
Angle / Chamfer (Deg): 36 / 45
Material: Chrome Steel 100Cr6 (Race & Balls)

Inner x Outer x Depth (mm): 35 x 47 x 8
Inch Dia: 1 - 1 / 4”
Angle / Chamfer (Deg): 45 / 45
Material: Chrome Steel 100Cr6 (Race & Balls)

Believed to be used on Venge frame 2016 Onwards. If in any doubt, please check dimensions of current bearing for comparison.
Note, older Venge frame upto 2015, see part number MH-P08F for upper bearing

Inner x Outer x Depth (mm): 35 x 45.3 x 7.3
Inch Dia: 1 - 1 / 4”
Angle / Chamfer (Deg): 45 / 45