Wheel Bearings

Inner x Outer x Depth (mm): 17 x 35 x 10mm
Used on: Wheels

This bearing can be delivered to us as 2RS or LLB seals.  Basically, we consider them to be the same, which is 2 rubber seals.
Inner x Outer x Depth (mm): 20 x 42 x 12mm
Used on: MTB Frame Suspension Pivots (Transition TR250 2011-2013 & TR450 2010-2013)

Inner x Outer x Depth (mm): 6 x 17 x 6
Used On: Jockey Wheel (Shimano)

Inner x Outer x Depth (mm): 8 x 22 x 7
Used On: Wheels (Mavic, Novatec)

Inner x Outer x Depth (mm): 8 x 22 x 7
Used On: Wheels (Mavic, Novatec)

Inner x Outer x Depth (mm): 8 x 22 x 7mm
Used on: Wheels

Inner Diameter x Outer Diameter x Depth: 8 x 26 x 7mm
Used on: Wheels
Brand: NTN
Seals: LLU contact seals are a closer fitting seal to rotating parts, and thus provide better protection against dirt and moisture ingress. Use where bearing longevity is more important and/or you frequently use your bike in harsh conditions. If racing or chasing watts is your priority then our non-contacting low friction seal version of this bearing (LLB Seals) might be more appropriate.

Inner x Outer x Depth (mm): 8 x 22 x 7mm
Used on: Wheels
Brand: NTN

Seals: LLB non contacting ultra low friction seals, where the seal does not contact the rotating parts. Use where rotation speed is most important (usually racing).  If bearing longevity is more important and you use your bike in harsh conditions frequently, then our contacting seal version of this bearing (LLU Seals) might be more appropriate.

These high end precision bearings with ultra low friction seals are a viable alternative to hybrid ceramic bearings, and what we would recommend (instead of hybrid ceramic).

Inner x Outer x Depth (mm): 9 x 24 x 7
Used On: Wheels (Mavic)

Inner x Outer x Depth (mm): 9 x 24 x 7
Used On: Wheels (Mavic)