Bearing Installation/Press Drift Tools
Bearing Installation/Press Drift Tools
Drifts to press bearings into Frames, Wheels and Bottom Brackets.
Select size(s) of drift press you need (i.e. to fit 6902) - you will receive a pair of drifts.
Then purchase the Threaded Bar separately using drop down option (it's within drop down menu above called 'drift size')
If you need more drifts in future, you will then already have the threaded bar, so won't need to keep purchasing threaded bar unneccesarily.
Drifts to press bearings into Frames, Wheels and Bottom Brackets.
Then purchase the Threaded Bar separately using drop down option (it's within drop down menu above called 'drift size')
If you need more drifts in future, you will then already have the threaded bar, so won't need to keep purchasing threade bar unneccesarily.
These drifts are supplied in pairs and matched to the internal and external diameter to enable accurate installation of your bearings. Please ensure you install 1 bearing at a time.
7.8mm diameter threaded bar, 200mm long, supplied with nuts and washers is an option and not automatically supplied with drifts. Select this separately (if you require) along with the drift size(s) you need.
Presses available (Supplied in Pairs):
1526 - ID 15mm x OD 26mm (fits bearings 15267 & 15268)
1728 - ID 17mm x OD 28mm (fits bearings 17286 & 17287)
22/2437 - ID 22mm and ID 24mm x OD 37mm (fits bearings MR22237 & MR2437 & MR24378)
6000 - ID 10mm x OD 26mm (fits bearing 6000)
6001 - ID 12mm x OD 28mm (fits bearing 6000 & 16100)
608 - ID 8mm x OD 22mm (fits bearing 608)
6800 - ID 10mm x OD 19mm (fits bearing 6800, 3800)
6801 - ID 12mm x OD 21mm (fits bearing 6801, 3801)
6802 - ID 15mm x OD 24mm (fits bearing 6802, 3802)
6803 - ID 17mm x OD 26mm (fits bearing 6803, 3803)
6804 - ID 20mm x OD 32mm (fits bearing 6804)
6805 - ID 25mm x OD 37mm (fits bearing 6805)
6806 - ID 30mm x OD 42mm (fits bearing 6806, 7806)
6900 - ID 10mm x OD 22mm (fits bearing 6900, 7900)
6901 - ID 12mm x OD 24mm (fits bearings 6091, 7901)
6902 - ID 15mm x OD 28mm (fits bearing 6902, 7902)
R6 - ID 9.5mm x OD 22.2mm (fits imperial bearing R6)
size | 1 |
---|