Search results for: 'capra+bearing'

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

IMPERIAL SIZED BEARING

Inner x Outer x Depth (mm): 9.53 x 22.23 x 7.14
Used On: Wheels

Inner x Outer x Depth (mm): 9 x 24 x 7
Used on: MTB Frame Suspension Pivots (YT Capra)

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 608 Bearings in size 8x22x7mm (ID x OD x Depth).

Drifts to press bearings into Frames, Wheels and Bottom Brackets.

Select size(s) of drift press you need . You will receive a pair of drifts for each size selected.

Then purchase the Threaded Bar separately using drop down option (it's within drop down menu above called 'drift size')

If you need more drifts in future, you will then already have the threaded bar, so won't need to keep purchasing threaded bar unneccesarily.

** IMPORTANT UPDATE** the design of the tools have changed slightly on the latest stock going forward. There is no longer a 'prong' cut-out and now is a continuous piece.  Most frames now have a flat surface around perimeter of bearing, which now enables the force of the load experienced when removing stubborn bearings to be distributed more evenly. Temporary picture displayed.

Bearing Tool specific for extracting and installing Frame Pivots Bearings in full suspension mountain bike frames.

Made from tool steel, to fit 6804 Bearings in size 20x32x7mm (ID x OD x Depth).

Believed to be used on Venge frame 2016 Onwards. If in any doubt, please check dimensions of current bearing for comparison.
Note, older Venge frame upto 2015, see part number MH-P08F for upper bearing

Inner x Outer x Depth (mm): 35 x 45.3 x 7.3
Inch Dia: 1 - 1 / 4”
Angle / Chamfer (Deg): 45 / 45

Specialized Part Ref: S162500005

Used on Venge frame 2016-2018 - upper only
Venge 2019 Onwards  - upper and lower
Note, older Venge frame upto 2015, see part number MH-P21 for lower bearing. 
If in any doubt, please check dimensions of current bearing for comparison.

Inner x Outer x Depth (mm): 40.5 x 49.5 x 6.5
Inch Dia: 1 - 1 / 2”
Angle / Chamfer (Deg): 45 / 45