Search results for: 'p08f+headset+bearing+stainless+stem'

ACB30418K Headset Bearing

Found in 'some' Acros Headsets

Inner x Outer x Depth (mm): 30.1 x 41.8 x 8
Inch Dia: 1-1/8”
Angle / Chamfer (Deg): 36 / 45

This Bearing 'set' consists of a lower stainless heasdset bearing inserted into a lower aluminium cup and supplied with a crown race. This is an original Acros product

Acros Part Ref: 44.02.700
ZS66/46/OD72
Stainless steel angular contact ball bearings

Key Features
• Weight: 70g
• Fork steerer: 1.8" (45.8mm)
• ⌀ Cup skirt: 66mm

This Bearing 'set' consists of a lower stainless heasdset bearing inserted into a lower aluminium cup and supplied with a crown race. This is an original Acros product

Acros Part Ref: 44.02.710
Note: Lower part 1.5" only
ZS66/40/OD72
Stainless steel angular contact ball bearings

Key Features
• Weight: 64g
• Fork steerer: 1.5" (39.8mm)
• ⌀ Cup skirt: 66mm

Used On: Canyon Bikes that run the AI-70 Headset (NOTE, This does not fit Canyon Endurance, Ultimate, Aeroad SLX 2016 onwards)
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon. 

This is a Bearing 'set' which consists of an upper and lower heasdset bearing & compression ring. 

Lower Bearing (AC3748)
Inner x Outer x Depth (mm): 37 x 48 x 7
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side

Upper Bearing (6707-2RS)
Inner x Outer x Depth (mm): 35 x 44 x 5
Angle / Chamfer (Deg): Non

Alternative Non-Acros version of this bearing set

Used On: Canyon Bikes that run the AI-70 Headset (NOTE, This does not fit Canyon Endurance, Ultimate, Aeroad SLX 2016 onwards)
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon. 

This is a Bearing 'set' which consists of an upper and lower heasdset bearing & compression ring. 

Lower Bearing (AC3748)
Inner x Outer x Depth (mm): 37 x 48 x 7
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side

Upper Bearing (6707-2RS)
Inner x Outer x Depth (mm): 35 x 44 x 5
Angle / Chamfer (Deg): Non

AI52/Ai52 Upper Headset Bearing, Note the lower bearing is our part ref 'P16'

Inner x Outer x Depth (mm): 42 x 52 x 7
Inch Dia: 1 - 1 / 2”
Angle / Chamfer (Deg): 45 / 45
Note: Same fit as Acros AC4252

Canyon/Acros AI70 Compression Ring.

Plastic ring inserted within the 6707-2RS Upper Bearing in the AI70 Headset

Important: This does not fit the CF Aeroad, Ultimate or Endurance SLX models that use AC3544 upper headset bearing - the chamfer angle is different.

Important Note: the 6901 bearing will be Max Complement, but the Chamfered headset bearings used in the suspension pivots are not available in Max Complement.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.

Important Note: the 6901 bearing will be Max Complement, but the Chamfered headset bearings used in the suspension pivots are not available in Max Complement.

This listing is for a full set of Frame Pivot Bearings only. No other hardware such as nuts, bolts, washers will be supplied.
Any pictures indicated in this listing is for reference to the year/design of frame in question.
Please click into this product and read the full description for further informaton about the bearings provided.