Search results for: 'p08f+headset+bearing+stainless+stem'

Note: FE Means "Flanged" and "Extended" - Flange is 2mm taking overall dia to 24mm, Inner Race Extends 1mm, taking overall depth to 8mm

IInner x Outer x Depth (mm):8 x 22/24 x 7/8mm
Used on: Yeti & Pivot Cycles

Note: Bearing with only 1 Seal and open other side of bearing for grease port access

Inner x Outer x Depth (mm): 15 x 28 x 7mm
Used on: MTB Frame Suspension Pivots

Important: this is an 'extended' inner race bearing - the inner race extends 3mm - as used on the brand Pivot Cycles

Inner x Outer x Depth (mm): 15 x 24 x 7/10mm
Used on: Frames

Note: "DR" is for "Dual Row" Bearing. Bearing inner race extends by 0.5mm on both sides
Inner x Outer x Depth (mm): 10 x 17 x 6/7mm
Used on: MTB Frame Suspension Pivots (Evil & Orbea Bikes)

Note: Angular Contact Bearings with only 1 Seal and open other side of bearing for grease port access

Inner x Outer x Depth (mm): 12 x 28 x 8mm
Used on: MTB Frame Suspension Pivots

Note: Angular Contact Bearings with only 1 Seal and open other side of bearing for grease port access

Inner x Outer x Depth (mm): 15 x 28 x 7mm
Used on: MTB Frame Suspension Pivots

Note: Angular Contact Bearing

Inner x Outer x Depth (mm): 12 x 28 x 8mm
Used on: MTB Frame Suspension Pivots

Note: Angular Contact Bearing

Inner x Outer x Depth (mm): 12 x 24 x 6mm
Used on: MTB Frame Suspension Pivots

Note: Angular Contact Bearing

Inner x Outer x Depth (mm): 15 x 28 x 7mm
Used on: MTB Frame Suspension Pivots

Dual Row Bearing  (Trek Ref: W541147)
Inner x Outer x Depth (mm): 12 x 21 x 8mm
Used on: MTB Frame Suspension Pivots (Trek Remedy, Fuel, Slash)