Sealed Bearings

FITS MANY PINARELLO ROAD BIKES USING NON-TAPERED 1-1/4" BEARINGS (SEE SEPARATE LISTING FOR STAINLESS VERSION)

Inner x Outer x Depth (mm): 35 x 47 x 7
Inch Dia: 1 - 1 / 4"
Angle / Chamfer: Non
Material: Chromium Steel GCR15 (Race & Balls)

FITS MANY PINARELLO ROAD BIKES USING NON-TAPERED 1-1/4" BEARINGS

• Inner x Outer x Depth (mm): 35 x 47 x 7
• Inch Dia: 1 - 1 / 4"
• Angle / Chamfer: Non
• Material: Stainless Steel SS440C (Race & Balls)

FITS MANY PINARELLO ROAD BIKES USING NON-TAPERED 1-1/2" BEARINGS

Inner x Outer x Depth (mm): 40 x 52 x 7
Inch Dia: 1 - 1 / 2"
Angle / Chamfer: Non
Material: Chromium Steel GCR15 (Race & Balls)

Inner x Outer x Depth (mm): 33.34 x 44.45 x 7.14
Angle / Chamfer: Non
Bearing ID: 33.34 mm (1 & 5 / 16")
Bearing OD:  44.45 mm (1 & 3 / 4")
Bearing Thickness: 7.14 mm (9 / 32")

USED ON CANNONDALE HEADSHOK & LEFTY Inner x Outer x Depth (mm): 39.7 x 50.8 x 7.14
Note, if you here looking at this bearing as the Cannondale MTB you have has a non Cannondale fork (such as Fox/Rockshox etc) then you need a lower bearing with a chamfer on the ID (to fit a normal compression headset system) - we do not stock this - not available as a separate bearing.

Inch Dia: 1-1/2"
Angle / Chamfer: Non
Alternative Part Ref: 397508 2RS MAX