Sealed Bearings

Only 1mm difference than 6902 bearing - this is 16mm ID, whereas a 6902 is 15mm.

Inner x Outer x Depth (mm): 16 x 28 x 7
Used On: Bottom Brackets & Wheels

This bearing sometimes has '6002' marked on seal for reasons unknown. A 6002 bearing is 15 x 32 x 9, so please consider what you have to be sure.

Inner x Outer x Depth (mm): 16 x 31 x 10
Used On: Bottom Brackets

Inner x Outer x Depth (mm): 17 x 28 x 6
Used on: Trek Frames, Ref: W305083

Inner x Outer x Depth (mm): 17 x 28 x 6mm
Used on: MTB Frame Suspension Pivots (Trek)

Note: Our current stock although is 2RS (2 Rubber seals) they state LB on one side and LU on other side.
LB is non-contact seal, and LU is contact, so the red LU seal is mounted outwards to face the elements, to help keep out the dirt/moisture for longer.

Inner x Outer x Depth (mm): 17 x 28 x 7
Used On: Wheels (Hope ProII Evo Freehub & Pro III Front Hub)

Inner x Outer x Depth (mm): 17 x 28 x 7
Used on: Frames (Salsa Bikes)

Stock is sometimes 2RS or LLB seal - they both light contact!
Inner x Outer x Depth (mm): 17 x 28 x 7
Used On: Wheels (Hope)

Inner x Outer x Depth (mm): 17 x 28 x 7mm
Used on: Wheels

Inner x Outer x Depth (mm): 17 x 31 x 10
Used On: Bottom Brackets

Inner x Outer x Depth (mm): 18 x 28 x 7
Used On: Wheels (Vision Wheels)
2RS or LLB seals suplied.